Precision-Interchangeable Series Thermistors and Thermistor Probe Assemblies
ON-900 Series

Vinyl Tip with Shielded-Jacketed Microphone Cable
Biological: Ideal for animal and biological applications in esophageal or rectal temperature measurement. It is also suitable for use in geographic and oceanographic applications. Design characteristics present an extremely rugged sensor assembly at a minimum cost. Leads: 12"
Maximum temperature: 100°C
Body Type ON-901 $36 - All prices include sensor
Model #
Resistance (ohms) @ 25°C
ON-901-44004
2,252
ON-901-44005
3,000
ON-901-44007
5,000
ON-901-44006
10,000
ON-901-44008
30,000



Epoxy Encapsulated Thermistor Sensor in Stainless Steel Housing with Vinyl Insulated Leads
Surface temperature readings: or control and indication. Ideally suited for applications such as: heat loss or compressor efficiency measurement and control studies of piping systems; determining manifold wall and bearing surface temperatures. Construction facilitates easy attachment to flat surfaces. Leads: 12"
Maximum temperature: 100°C
Body Type ON-909 $48 - All prices include sensor
Model #
Resistance (ohms) @ 25°C
ON-909-44004
2,252
ON-909-44005
3,000
ON-909-44007
5,000
ON-909-44006
10,000
ON-909-44008
30,000


Exposed Epoxy Coated Thermistor Sensor mounted in Open-End Stainless Steel Housing with Vinyl Shielded Jacketed Microphone Cable
ON-906 has Economical Plastic Housing.
 Air temperature measurement, control and indication: design characteristics offer a perfect sensor assembly for monitoring gas streams. Ideal for temperature measurement and control of remote air readings.
Leads: 12"
Maximum temperature: 100°C
Body Type ON-906 $50
 Body Type ON-905 $55
All prices include sensor
Model #
Resistance (ohms) @ 25°C
ON-905-44004
ON-906-44004
2,252
ON-905-44005
ON-906-44005
3,000
ON-905-44007
ON-906-44007
5,000
ON-905-44006
ON-906-44006
10,000
ON-905-44008
ON-906-44008
30,000


Closed-End Stainless Steel Tube with Thermistor Sensor Mounted in Tip.
1/8" NPT Fitting with Vinyl Shielded-Jacketed Microphone Cable
Liquid immersion sensor assembly: rugged design and closed end construction. Ideally suited for temperature measurement, control and indication in fluids. Also for use in a wide variety of pressurized systems applications. Leads: 12"
Maximum temperature: 100°C
Body Type ON-910 $55 - All prices include sensor
Model #
Resistance (ohms) @ 25°C
ON-910-44004
2,252
ON-910-44005
3,000
ON-910-44007
5,000
ON-910-44006
10,000
ON-910-44008
30,000


Closed-End Stainless Steel Tube with Thermistor Sensor Mounted in Tip.
1/8" NPT Fitting with Vinyl Shielded-Jacketed Cable
Biological: tubular autoclavable immersion sensor assembly with detachable mating connector. Used in temperature measurement and control of animal apparatus. Also for use in closed vessels with pressurized systems where detachable leads are desirable. Leads: 12"
Maximum temperature: 100°C
Body Type ON-920 $83 - All prices include sensor
Model #
Resistance (ohms) @ 25°C
ON-920-44004
2,252
ON-920-44005
3,000
ON-920-44007
5,000
ON-920-44006
10,000
ON-920-44008
30,000


Epoxy Encapsulated Thermistor Sensor in Screw Mounted Aluminum Housing with Teflon® Insulated Leads
Surface sensor assembly: designed for a variety of temperature measurement and control applications. It represents a low cost, fast response unit and lends itself to easy mounting on flat surfaces. Leads: 12"
Maximum temperature: 100°C
Body Type ON-930 $44 - All prices include sensor
Model #
Resistance (ohms) @ 25°C
ON-930-44004
2,252
ON-930-44005
3,000
ON-930-44007
5,000
ON-930-44006
10,000
ON-930-44008
30,000


Encapsulated Thermistor Sensor in Molded Housing with Teflon® Insulated Leads
Insertion sensor assembly: specifically designed for high reliability, high volume, and low cost applications where fast time response and small size are determining factors. The unit is easily affixed by inserting in a small hole for mounting. Leads: 12"
Maximum temperature: 100°C
Body Type ON-940 $42 - All prices include sensor
Model #
Resistance (ohms) @ 25°C
ON-940-44004
2,252
ON-940-44005
3,000
ON-940-44007
5,000
ON-940-44006
10,000
ON-940-44008
30,000


Stainless Steel Housing with 1/4" Hex. Head and #8-32 NC-2A Threaded Body.
Thermistor Sensor Epoxy Encapsulated in Housing with Teflon® Insulated Leads
Surface sensor assembly: for temperature measurement and control where design problems require stability against vibration and shock. The unit has been designed for temperature control and measurement problems where low cost and reliability are crucial. Leads: 12"
Maximum temperature: 100°C
Body Type ON-950 $43 - All prices include sensor
Model #
Resistance (ohms) @ 25°C
ON-950-44004
2,252
ON-950-44005
3,000
ON-950-44007
5,000
ON-950-44006
10,000
ON-950-44008
30,000


Closed-End Stainless Steel Tube with Thermistor Sensor Mounted in Tip. Stainless Steel Mounting Plate with (2) Two Mounting Holes Welded to Tube. Teflon® Insulated Leads
Model #
Resistance (ohms) @ 25°C
ON-960-44004
2,252
ON-960-44005
3,000
ON-960-44007
5,000
ON-960-44006
10,000
ON-960-44008
30,000
Air flow sensor assembly: designed to satisfy the many requirements of air temperature-measurement and control in Air Conditioning systems and equipment cooling systems. The unit lends itself to easy mounting to standard metal ducting. Leads: 12"
Maximum temperature: 100°C
Body Type ON-960 $44 - All prices include sensor


Stainless Steel Housing with 7/16" Hex. Head and 1/8-#27 NPT Threaded Body.
Thermistor Sensor Epoxy Encapsulated in Housing with Teflon® Insulated Leads
Model #
Resistance (ohms) @ 25°C
ON-970-44004
2,252
ON-970-44005
3,000
ON-970-44007
5,000
ON-970-44006
10,000
ON-970-44008
30,000
Liquid immersion fluid sensor assembly: ideal for obtaining temperature measurement and control readings in pipes or closed vessels within pressurized systems. Threaded hex. head design affords greater resistance to shock and vibration when mounted. Leads 12" standard, other lengths available, consult factory. Leads: 12"
Maximum temperature: 100°C
Body Type ON-970 $55 - All prices include sensor


NOTE: NEWPORT ’s Precision Interchangeable Probes are normally constructed with ±0.2°C Interchangeable Thermistors. These are Types 44004, 44005, 44007, 44006 and 44008. If assemblies are required with ±0.1°C Interchangeable Probes, change the portion of the model number designation to reflect the ±0.1°C Thermistor.
Example: ON-901-44004 becomes ON-901-44033. Add $11 to the designated Model price for ±0.1°C Interchangeable Thermistors. Interchangeable Thermistors with ±0.1°C Interchangeability are Types 44033, 44030, 44034, 44031 and 44032
Copyright 2003, NEWPORT Electronics, Inc. All rights reserved.
SearchSite MapManualsPricelistQuotesPurchaseProductsNewport Homee-mail NEWPORT HOME Newport Home Purchase Quotes Products Newport Home Pricelist Manuals Site Map Search e-mail