HANDBOOK 44 SCALE METER
NTEP CERTIFICATION #92-152 Shown with LC101 Series Load Cell Sold Separately	The INFW scale meter is a microprocessor-based indicator/ controller with enhanced features that allow you to easily configure the unit for virtually any application. It is compatible with most strain gage sensors such as load cells and pressure transducers. NEWPORT PRODUCT INFO • MANUAL - PDF • MECHANICAL • PRICE • REQUIRES ADOBE ACROBAT - HELP

INFW
	Selectable Scale Divisions, Selectable Classes I (III, IIIL, or IV) and Handbook 44 Certification
	6 Digits
	2 or 5 Coordinate Linearization of Input Signals
	Four Isolated Open Collector Outputs
	Wide Selection of dc Voltage and Current Ranges
	Ratiometric Inputs
	Tare-Fixed, Auto or Sequential
	1.5 to 11 and 24 Vdc Sensor Excitation
	Large Digital Offset Capabilities Enabling Easy Scaling in Engineering Units
	Smart Filtering Detects the Difference Between a Spike or Process Change (Patent Applied For)
	Selectable Decimal Point and Read Rates of up to 13 Readings/Sec
	Peak and Valley Detection and Memory
	Configurable Via Front Pushbuttons or Via RS-232 or RS-485
OPTIONS
	Isolated Dual 7 Amp Form C (SPDT) Relays
	Isolated Parallel BCD Output
	Isolated Analog Output of 0-10 Vdc, 0-5 Vdc, 1-5 Vdc, 0-20 mA dc and 4-20 mA dc
	Isolated Serial RS-232
	Isolated RS-485, Addressable up to 199 Units

The INFINITY^® scale meter can be configured, via the five front-panel pushbuttons and/or the optional serial communications boards, to accept any of a variety of dc voltage ranges (some ranges plus unipolar or bipolar are first selected via a jumper located at the top of the instrument housing) and display them in engineering units.

Standard features include normal or sequential tare, peak or valley recall, tare limit, and a high resolution A/D converter with digital scaling and offset. Other features include dual relay or BCD output, isolated analog output, RS-232 or RS-484 serial communications options, auto or sequential tare, class selection, and display of units of measure. Self-diagnostics are performed automatically on power-up.

These meters provide both software and hardware lockout configurations which let you define the parameters, from setpoint adjustment to total reprogramming. Users can scale and offset their input signal into any engineering units desired. This is accomplished by the use of an exclusive two or five data point method of scale and offset for linearization of input signals transmitted from a sensor. The meter provides a choice of sensor excitations of 1.5 to 11 Vdc or 24 Vdc for sensors such as load cells, strain gages, and pressure transducers.

INFZW Split Meter

Self-Adjusting Weight Assemblies TWA5 Load Cell Included Available from OMEGADYNE, INC.

SPECIFICATIONS
Accuracy: ±0.005% rdg
Span Temperature Coefficient: ±15 ppm/°C
Step Response: 1 sec to 99.9%
Warmup to Rated Accuracy: 55 min
Operating Ambient: 0 to 50°C (32 to 122°F), 95%RH, non-condensing
Storage Ambient: -40 to 85°C (-40 to 185°F)
Power: 115 or 230 Vac, 49-400 Hz; 10 to 32 Vdc
Power Consumption: 6 W nominal, 10 W max.
Normal Mode Rejection: 60 dB
Common Mode Rejection: 120 dB
Common Mode Voltage: 1500 V peak per Hv test
Conversion: dual-slope technique
Reading Rate: 3/sec or 13/sec, 60 Hz; 3/sec or 12/sec, 50 Hz
Display: red or green 6-digit, 14-segment, 13.7 mm (0.54"); 4 alarm indicators
Dimensions: 48 H x 96 W x 165 D mm (1.89" x 3.78" x 6.5")
Panel Cutout: 45 H x 92 W mm (1.772" x 3.622"); 1/8 DIN
Weight: 574 g (1.27 lb)
TTL Outputs: four, isolated open collector; rated 150 mA at 1 V sink, 30 V open
BCD Output: isolated, tri-state, TTL/CMOS compatible; external 5 V supply for isolated; internal 5 V supply for non-isolated
Dual Relays: form C, 7 A at 30 Vdc or 230 Vac
Four Relay Option: dual 7A relays and dual 1 A relays
Analog Output: 0-5 V/1-5 V/0-10 V/0-20 mA/4-20 mA, user selectable; 354 Vp isolation; 14-bit resolution; 0.1% accuracy, 50 msec step response
RS-232 Communications: 300/600/1200/2400/4800/9600/19.2k baud; RJ11 4-wire connection; complete program setup and message display capability; programmable to transmit current display, alarm status, min/max, actual measured input value and status
RS-485 Communications: 300/600/1200/2400/4800/9600/19.2k baud; RJ12 6-wire connection; addressable from 0 to 199
Voltage Input Ranges: 0-100 mV, 0-1 V, 0-5 V, 1-5 V, 0-10 V, 0-100 V, ±50 mV, ±500 mV, ±5 V, ±50 V
Current Input Ranges: 0-20 mA, 4-20 mA
Input Configuration: single-ended
Polarity: unipolar/bipolar, programmable
Span Adjustment: +0.00001 to 500,000, programmable
Offset Adjustment: 0 to 999,999 or 0 to -99,999; programmable
Sensor Excitation: 10 V at 30 mA for bridge; 24 V at 25 mA for loop power

To Order (*insert number code to complete model #) Prices Shown in U.S. Dollars

INPUT SIGNAL

OPTIONS

Ordering Examples:
1.) INFW-0200-DC7, Standard Panel Meter with two relays, ±50 mV input, 115 Vac power and red LED display, $595 + 75 = $670.
2.) INFZW-2210-DC1 Split Meter, two relays, analog output and 0-100 mVdc input, 115 Vac power and green LED display, $645 + 75 + 110 = $830.