|
3 1/2 DIGIT PROCESS RECEIVER, TRANSMITTER & CONTROLLER
Q2000P Process Receiver Q2000E Process Receiver with Excitation Output |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Q2000P
OPTIONS
Analog
output for user-selected span
Single-setpoint
10 A relay control
Dual-setpoint
10 A relay control
Proportional
4-20 mA control
Time-proportional
2 A solid-state relay control
Parallel
BCD output, isolated
NEMA-4
splash-proof lens cover
The Q2000P is a 3 1/2 digit process receiver with extensive zero and span adjustment capability for readout in engineering units. The more popular process signals are 4-20 mA, 10-50 mA, 1-5 V and 0-10 V. The Q2000P can also be scaled for other signal levels. Full-scale input ranges are selectable from ±1 to ±50 mA (current signal) or ±0.5 to ±20 V (voltage signal). Zero is adjustable up to ±100% of full-scale readout for every input range.
The Q2000E is an enhanced version of the Q2000P with an excitation output for powering transmitters and active transducers. In many cases, this output can eliminate the need for a more expensive external supply. The output shares the ground of the signal input. Two output levels are jumper-selectable: 10 V dc at up to 50 mA and 15 V dc at up to 25mA.
CONFIGURATION AND CALIBRATION
The price of the Q2000P and Q2000E includes configuration and calibration, normally provided by an authorized Newport distributor. Both models can also be configured and scaled in the field. Full-scale signal, coarse-span and coarse-zero ranges are selected by plug-in jumpers. A complete set of internal shunts and attenuators are already on board. Fine-zero and fine-span potentiometers are accessible behind the lens to allow final calibration or field recalibration without removal of the panel meter.
POWER AND DISPLAY OPTIONS
Six types of meter power are available: 120 V ac, 240 V ac, 24 V ac, 5 V dc, isolated 9-32 V dc and isolated 26-56 V dc. An LED display is standard. An LCD display is avail- able and is useful for viewing in bright ambient light.
ANALOG OUTPUT OPTIONS
A 1 mV/count (±2 V full-scale) analog output is standard and is ideal for driving a strip-chart recorder. An additional analog output can be provided by an optional vertical plug-in board. Available output signals are 0-5 V dc, 0-10 V dc, 0-1 mA (source or sink), and 4-20 mA (source or sink). The top and bottom of each output range can be scaled to fit a user-selected display span.
CONTROL OUTPUT OPTIONS
Additional outputs can be provided by a horizontal upper board. Available options include single-setpoint control with one 10 A relay, dual-setpoint control with two 10 A relays, 4-20 mA proportional control (source or sink), time-proportional 2 A solid-state relay control, and isolated, parallel BCD output. For additional information, please refer to the QUANTA and Mechanical sections.
Analog
output for user-selected span Single-setpoint
10 A relay control Dual-setpoint
10 A relay control Proportional
4-20 mA control Time-proportional
2 A solid-state relay control Parallel
BCD output, isolated NEMA-4
splash-proof lens coverThe Q2000P is a 3 1/2 digit process receiver with extensive zero and span adjustment capability for readout in engineering units. The more popular process signals are 4-20 mA, 10-50 mA, 1-5 V and 0-10 V. The Q2000P can also be scaled for other signal levels. Full-scale input ranges are selectable from ±1 to ±50 mA (current signal) or ±0.5 to ±20 V (voltage signal). Zero is adjustable up to ±100% of full-scale readout for every input range.
The Q2000E is an enhanced version of the Q2000P with an excitation output for powering transmitters and active transducers. In many cases, this output can eliminate the need for a more expensive external supply. The output shares the ground of the signal input. Two output levels are jumper-selectable: 10 V dc at up to 50 mA and 15 V dc at up to 25mA.
CONFIGURATION AND CALIBRATION
The price of the Q2000P and Q2000E includes configuration and calibration, normally provided by an authorized Newport distributor. Both models can also be configured and scaled in the field. Full-scale signal, coarse-span and coarse-zero ranges are selected by plug-in jumpers. A complete set of internal shunts and attenuators are already on board. Fine-zero and fine-span potentiometers are accessible behind the lens to allow final calibration or field recalibration without removal of the panel meter.
POWER AND DISPLAY OPTIONS
Six types of meter power are available: 120 V ac, 240 V ac, 24 V ac, 5 V dc, isolated 9-32 V dc and isolated 26-56 V dc. An LED display is standard. An LCD display is avail- able and is useful for viewing in bright ambient light.
ANALOG OUTPUT OPTIONS
A 1 mV/count (±2 V full-scale) analog output is standard and is ideal for driving a strip-chart recorder. An additional analog output can be provided by an optional vertical plug-in board. Available output signals are 0-5 V dc, 0-10 V dc, 0-1 mA (source or sink), and 4-20 mA (source or sink). The top and bottom of each output range can be scaled to fit a user-selected display span.
CONTROL OUTPUT OPTIONS
Additional outputs can be provided by a horizontal upper board. Available options include single-setpoint control with one 10 A relay, dual-setpoint control with two 10 A relays, 4-20 mA proportional control (source or sink), time-proportional 2 A solid-state relay control, and isolated, parallel BCD output. For additional information, please refer to the QUANTA and Mechanical sections.
SPECIFICATIONS
ANALOG INPUT
ANALOG INPUT
|
VOLTAGE RECEIVER
|
Most-sensitive
scaling
|
Least-sensitive
scaling
|
|
Signal
range
|
±0.5
V
|
±20
V
|
|
Display
range
|
±1,999
counts
|
±1,999
counts
|
|
Resolution
|
250
µV/count
|
10
mV/count
|
|
Input
resistance
|
100
kohm
|
1.0
Mohm
|
|
Bias
current
|
100
pA
|
13
pA
|
|
Maximum
voltage
|
250
Vp
|
250
Vp
|
|
CURRENT
RECEIVER
|
Most-sensitive
scaling
|
Least-sensitive
scaling
|
|
Signal
range
|
±1.0
mA
|
±50.0
mA
|
|
Display
range
|
±1,999
counts
|
±1,999
counts
|
|
Resolution
|
500
nA/count
|
25µA/count
|
|
Input
resistance
|
500
ohm
|
10
ohm
|
|
Voltage
drop, max
|
±0.5
V
|
±0.5
V
|
VOLTAGE & CURRENT RECEIVER
Full-scale signal input: Six jumper-selectable ranges
Coarse-span adjustment: Four jumper-selectable ranges
Fine-span adjustment: Front-panel potentiometer
Coarse-zero adjustment: Four jumper-selectable ranges
Fine-zero adjustment: Front-panel potentiometer
Input configuration: Single-ended
NOISE REJECTION
NMR, SIG HI to SIG LO: 75 dB, 50/60 Hz
CMR, SIG GND to PWR GND: 120 dB
CMV, SIG GND to PWR GND: 1500 Vp per HV test, 354 Vp per IEC spacing
ACCURACY AT 25°C
Error, max: ±0.05% of reading ±1 count
Span tempco: ±0.01% of reading/°C
Zero drift, max: ±0.01% of reading/°C
Offset drift, max: ±(0.01% offset V ±0.01% FS V)/°C
Step response: 1 s to 99.9% of span
Warmup to rated accuracy: 10 min
ANALOG-TO-DIGITAL CONVERSION
Technique: Dual-slope, average-value
Signal integration period: 100 ms
Read rate: 2.5/s
TRANSMITTER EXCITATION SUPPLY (Q2000E)
Output voltage: 10 or 15 V dc, jumper-selectable
Output current, max: 50 mA at 10 V dc, 25 mA at 15 V dc, 50 mA for sum for all output currents, including control output and analog output
Line regulation, max: ±0.2% for 10% change of AC line power voltage
Load regulation, max: ±0.5% from zero to max load
Ripple at 50/60 Hz: ±0.01%
DISPLAY
LED: 0.56 in (14.2 mm) 7-segment, red
LCD: 0.50 in (12.7 mm) 7-segment liquid crystal
Symbols: 1.8.8.8
Decimal point positions: Three positions selectable by jumpers behind lens or at connector
Overrange indication: Three-least significant digits blanked
POWER
AC voltages: 120, 240 or 24 V ac +10%/15%
AC frequency: 49-440 Hz
DC voltages: 9-32 V dc, isolated to 300 Vp; 26-56 V dc, isolated to 300 Vp; 5 V dc ±5%, non-isolated
Power consumption: 10 W max
ENVIRONMENTAL
Operating temperature: 0 to 60°C
Storage temperature: 40 to +85°C
Relative humidity: 95% at 40°C (non-condensing)
MECHANICAL
Dimensions: Newport DIN1A (1/8 DIN) case (see Mechanical section for drawings)
Weight: 17 oz (480 g)
Case material: 94V-0 UL-rated polycarbonate
Copyright 2003,
NEWPORT Electronics, Inc. All rights reserved.