PORTA-LAB
SALT ANALYZER
Accurately and rapidly measures the percentage salt contents of foods
(canned, dry packed, surface salted, snacks or beverages)
Salts dissociate at differing rates in different solvents. Each has a unique Conductivity vs % Salt graph. While similar, these are not precise duplicates. The SM-10 can be calibrated to match a single one titration point. A chart is needed if full range values are required.
Typical
Foods Tested
SPECIFICATIONS
Liquid Crystal Display Scale: 3 1/2 digit reads .001-2.00% or .01-20%
Accuracy: ±2% span
Temperature Compensation: Probe is thermister compensated over -5º to +55ºC range
Batteries: Ni-Cd batteries (included) can perform 800 tests between rechargings. "Test" Circuit displays voltage.
Case: Shock resistant ABS plastic with integral carrying handle. Handle provides tilt-up support for orientation of instrument face.
Probe: Gold plated, cylindrical housed electrode is open on both ends to eliminate air entrapment when dipped in sample. 3 ft. cable provides remote sensing capability.
Weight: 3 lbs.
Size: 7-1/2" x 8.5" x 4" (17.8 x 21.6 x 10.2 cm)
Accurately and rapidly measures the percentage salt contents of foods
(canned, dry packed, surface salted, snacks or beverages)
|
SM-10
|
NEWPORT's
SM-10 Digital Salt Analyzer provides a rapid, economical
method for testing sodium chloride in food products. Developed
expressly for food industry, the SM-10 eliminates the
need for costly, time consuming titrations by using a dip style
electrode for analysis. Factory calibrated for % NaCl in water,
a front panel mounted adjustment knob permits recalibration
for the specific product being tested. Two switch selectable
ranges 0-2% and 0-20% provide high resolution digital reading
of tested salt values.
SM-10's describe the non-linear relationship between conductivity and percent salt adjusted for temperature. The specific factory calibration is for NaCl in water. Soak samples of dry or surface salted foods in distilled water to produce a sample fluid or use packing fluid from wet packed products for analysis. When the electrode is dipped in the sample, the percent of salt concentration is displayed digitally. Display will read "1" if the concentration is over scale. Recalibration for salts (other than NaCl in H20) with similar Conductivity vs % Salt Concentration characteristics is possible using the calibration adjustment on the front panel. Adjust the digital value to match the titration results. This provides a single point recalibration. |
|||||||||||||||||
Salts dissociate at differing rates in different solvents. Each has a unique Conductivity vs % Salt graph. While similar, these are not precise duplicates. The SM-10 can be calibrated to match a single one titration point. A chart is needed if full range values are required.
| Animal Feeds | Chili | Ketchup | Salad Dressings |
| Baby Foods | Cocoa Mix | Mayonnaise | Salmon |
| Bacon Bits | Cookies | Meats | Sauces |
| Bar-B-Que Mix | Crackers | Milk Products | Shrimp |
| Beef Products | Creamed Prodcuts | Mustard | Soups |
| Buillion Cubes | Drink Mixes | Nuts | Soy Sauce |
| Butter | Dry Mixes | Olives | Spices |
| Cake Mix | Dry Products | Onion Salt | Tomato Products |
| Candies | Egg Prodcuts | Pancake Mix | Tuna |
| Canned Foods | Fish | Peanut Butter | Vegetable Concentrates |
| Cavier | French Fries | Popcorn | V-8 Juice |
| Cereals | Garlic Salt | Potato Chips | |
| Cheese | Gravy Mix | Pretzels |
SPECIFICATIONS
Liquid Crystal Display Scale: 3 1/2 digit reads .001-2.00% or .01-20%
Accuracy: ±2% span
Temperature Compensation: Probe is thermister compensated over -5º to +55ºC range
Batteries: Ni-Cd batteries (included) can perform 800 tests between rechargings. "Test" Circuit displays voltage.
Case: Shock resistant ABS plastic with integral carrying handle. Handle provides tilt-up support for orientation of instrument face.
Probe: Gold plated, cylindrical housed electrode is open on both ends to eliminate air entrapment when dipped in sample. 3 ft. cable provides remote sensing capability.
Weight: 3 lbs.
Size: 7-1/2" x 8.5" x 4" (17.8 x 21.6 x 10.2 cm)
To
Order (Specify
Model No.) Prices shown in U.S. Dollars
|
Model
No.
|
Description
|
Price
|
|
SM-10
|
Digital Salt Analyzer (replacement probe included) |
$930
|
Ordering
Example: SM-10 salt analyzer, $930.
Additional Salt Analyzer Product
SM-8 "Pocket Pal": Salt Analyzer for "dip and read" analyses in production and laboratory environments. Probe is integral to this hand-held unit and folds away into the instrument handle when not in use.
ACCESSORIES
|
Model
No.
|
Description
|
Price
|
|
265064
|
Standard Replacement probe |
$140
|
|
265065
|
Replacement probe with rubber boot |
$165
|
|
200347
|
Probe Cleaning Kit |
$10.95
|
|
CDS-0
|
Probe Cleaning Solution |
$12.95
|
|
CDS-1-NACL
|
Quart 1% NaCl Calibrating Solution |
$12.95
|
|
CDS-10-NACL
|
Quart 10% NaCl Calibrating Solution |
$12.95
|
Additional Salt Analyzer Product
SM-8 "Pocket Pal": Salt Analyzer for "dip and read" analyses in production and laboratory environments. Probe is integral to this hand-held unit and folds away into the instrument handle when not in use.
Copyright 2003,
NEWPORT Electronics, Inc. All rights reserved.