ICE POINT / HOT POINT - Factory Calibrations for Sensors, Wire & Instruments

FACTORY & NIST CALIBRATIONS for SENSORS, WIRE & INSTRUMENTS
CALL OR E-MAIL FOR PRICING

ICE POINT™

NEWPORT's ICE POINT™ is a highly accurate 0ºC Thermoelectric "Refrigerator" Used in the Calibration of Temperature Instruments. Model TRCIII.

With calibration instrumentation conforming to MIL-STD-45662A, NEWPORT can calibrate individual products (both new and existing) or complete systems, with NIST traceability if required. Scheduled, periodic calibration of equipment is easily arranged as well.

Probes and instruments that may be calibrated at customer-specified temperatures:

Thermocouple and RTD probes (thermistor must be calibrated as a system with a meter and wire).
Thermocouple wire.
Probe/meter systems.
Meters/instrumentation.

Wire calibration requires cutting approximately 3' from the spool being tested, forming a bead and performing the calibrations. The tested wire will be sent along with the spool and certification.

HOT POINT™
HOT POINT

NEWPORT's HOT POINT™ Thermocouple and RTD Calibrator Calibrates All Temperature Sensors to Within ±1.5ºF.

CALIBRATION SERVICES AVAILABLE FROM NEWPORT
INSTRUMENTS & PROBES
Upon request, NEWPORT will guarantee products Probes Certificate of ANSI are manufactured in accordance with all applicable Conformance/ instructions and specifications. NEWPORT certifies Compliance that all thermocouple materials conform to ANSI standard MC96.1. RTD materials conform to DIN 43 760.
Model No.CAL-1
Certificate of ANSI Conformance/ Compliance

NIST TRACEABLE INSTRUMENTATION
Upon request, NEWPORT will certify that Instrumentation has been calibrated and tested to meet or exceed published specifications. Calibration and testing are performed using instrumentation and standards traceable to the U.S. National Institute of Standards and Technology (NIST).
Model No. CAL-2
NIST Traceability Certification

NIST TRACEABILITY OF INSTRUMENTATION
Same as CAL-2, with the addition of the NIST test numbers for reference. 5 fixed points of data.
Model No. CAL-3
Certificate with NIST Test Number $75

NIST TRACEABLE CALIBRATION OF PROBES
NEWPORT certifies that the item has been calibrated and the calibration is certified as traceable to NIST. NIST test numbers are documented on the certificate for traceability. Pricing: $75 setup charge plus $25 per temperature calibration point for thermocouples or $35 per temperature calibration point for RTDs. For wire, setup charge is $90.
Model No. CAL-4
Certificate NIST Traceable Calibration at Customer Specified Temperature Points* From $100

FACTORY CALIBRATION OF PROBES
Available for Types J, K, T, E and N mineral insulated thermocouples: quick disconnect, transition junction, utility handle, and low-noise styles. Each probe certified at four temperature standards. Calibration card included "pre-stocked" with each probe.
Model No. CAL-5
Factory Calibration Certificate $15, probe calibrated at 4 fixed temperature points

Temperature Range	Equipment	Accuracy
-25 to 100ºC	Fluid bath	Minimum probe length 3". Accurate to 0.2ºC.
100 to 400ºC	Aerated sand bath	Minimum probe length 7". Accurate to ±0.4ºC.
400 to 1000ºC	Hot air oven	Minimum probe length is 18". Accurate to ±0.25% of the specified temperature.