|
Model
No.
|
3
3/4 DIGIT METER for DC, AC, RMS, PROCESS STRAIN, OR MICROVOLTS
DC |
PRICE
|
|
|
3
3 /4 digit (± 3,999 count) voltmeter available for DC, AC,
process signal, or bridge input. Standard features include
LED display, display hold, BCD output, 1 /8 DIN case, and
PCB edge connector for power, signal, non-isolated BCD &
TTL handshake signals. |
$325.00
|
|
OPTIONS
|
DESCRIPTION |
PRICE
|
|
INPUT
SIGNAL
|
|
*
|
DC
voltage |
N/C
|
|
AVG
|
AC
voltage (includes D4 connector) |
$155.00
|
|
RMS
|
True-RMS
voltage (includes D4 connector) |
$155.00
|
|
LA2
|
Gain-programmable
preamplifier with active filter and bridge excitation
|
$164.00
|
|
LP2
|
Gain-programmable
preamplifier with peak hold and bridge excitation
|
$184.00
|
|
-FS
|
Customer-specified
offset and span. Specify min input, min reading; max input,
max reading. Includes ER2 (±5,999 count) option |
$50.00
|
| INPUT
RANGE |
|
*
|
Not
applicable for LA2, LP2 or -FS input signals |
N/C
|
|
OPTIONS
|
DESCRIPTION |
PRICE
|
|
ZERO-OFFSET
ADJUSTMENT
|
|
*
|
Standard
(±0.35% of span) |
N/C
|
|
ZO
|
Extended
(±10% of span) not available with FS |
$40.00
|
|
DISPLAY
RANGE OPTION
|
|
*
|
±3,999
counts (standard) |
N/C
|
|
ER1
|
±4,999
counts (DC input signal only) |
$20.00
|
|
ER2
|
±5,999
counts (DC input signal only) |
$20.00
|
|
OPTICAL
ISOLATION
|
|
*
|
None
(analog and digital grounds are tied together) |
N/C
|
|
OI
|
Optical
isolation between analog and digital grounds. Mutually exclusive
with input option LP2 |
$35.00
|
|
3-WIRE
RATIO INPUT IMPEDANCE
|
|
*
|
Standard |
N/C
|
|
HZ
|
High-impedance
(100 Mohm reference input only) |
$20.00
|
|
UPPER-BOARD
OUTPUT OPTIONS - Mutually
exclusive with options LA2 and LP2
|
|
*
|
None
(unbuffered, non-isolated BCD is standard)* |
N/C
|
|
F3A
|
Buffered,
gated and stored parallel BCD output* |
$102.00
|
|
F3P
|
Buffered
and stored parallel BCD with peak or valley hold* |
$132.00
|
|
F4A
|
Buffered,
isolated, gated, and stored parallel BCD* |
$117.00
|
|
F4M
|
F4A
with 4-line binary addressing* |
$122.00
|
|
O5
|
Linearized
analog output of 0.5 mV/count for use with AC powered units
only. D1, D3, D4 required** |
$110.00
|
|
O6
|
Single-setpoint
controller with TTL and reed-relay outputs (programmed by
customer at rear connector)** |
$110.00
|
|
O506
|
Both
05 and 06 output options for use with AC powered units only.
D4 required* |
$160.00
|
| *
Includes PCB edge connector. |
|
POWER
|
|
*
|
115
Vac, 50/60 Hz |
N/C
|
|
C1
|
230
Vac, 50/60 Hz |
N/C
|
|
C3
|
5
Vdc (optimized for 60 Hz rejection) |
$45.00
|
|
C4
|
5
Vdc (optimized for 50 Hz rejection) |
$45.00
|
|
C3B
|
Isolated
9-32 Vdc (optimized for 60 Hz rejection) |
$120.00
|
|
C4B
|
Isolated
9-32 Vdc (optimized for 50 Hz rejection) |
$120.00
|
|
C3D
|
Isolated
26-56 Vdc (optimized for 60 Hz rejection) |
$120.00
|
|
C4D
|
Isolated
26-56 Vdc (optimized for 50 Hz rejection) |
$120.00
|
| ADD-ON
OPTIONS |
|
XZ
|
Extra
zero, fixed, at right of display |
$20.00
|
|
D3
|
Upper
PCB edge connector for output option cards |
$7.00
|
|
D4
|
Screw-terminal
barrier strip for power and signal (removes these inputs
from PCB edge connector). D4 Option required for CE |
$16.00
|
|
BL
|
Lens
without Newport logo |
$15.00
|
